b0VIM 8.0 ���g�� 7 root iZdzfnv9mwfppeZ /etc/httpd/conf/httpd.conf utf-8
U3210 #"! U tp _ = ` = � ��������k � D ad I � _ � � q ) � � � S �
}
J
H
� � k # � � ~ } { 6 �
v
)
� � � � � � n 2 % # � � � � � } W U � q * � � � � � t D B � � � � w j i K I � } < : � � � � � � I � � � � � b � � � # # it explicitly to prevent problems during startup. # This can often be determined automatically, but we recommend you specify # ServerName gives the name and port that the server uses to identify itself. # ServerAdmin root@localhost # # as error documents. e.g. admin@your-domain.com # e-mailed. This address appears on some server-generated pages, such # ServerAdmin: Your address, where problems with the server should be # # # virtual host being defined. # in which case these default settings will be overridden for the # All of these directives may appear inside <VirtualHost> containers, # # any <VirtualHost> containers you may define later in the file. # <VirtualHost> definition. These values also provide defaults for # server, which responds to any requests that aren't handled by a # The directives in this section set up the values used by the 'main' # # 'Main' server configuration Group apache User apache # # running httpd, as with most system services. # It is usually good practice to create a dedicated user and group for # User/Group: The name (or #number) of the user/group to run httpd as. # # httpd as root initially and it will switch. # If you wish httpd to run as a different user or group, you must run # Include conf.modules.d/*.conf # # LoadModule foo_module modules/mod_foo.so # Example: # # to be loaded here. # Statically compiled modules (those listed by `httpd -l') do not need # directives contained in it are actually available _before_ they are used. # have to place corresponding `LoadModule' lines at this location so the # To be able to use the functionality of a module which was built as a DSO you # # Dynamic Shared Object (DSO) Support # Listen 80 #Listen 12.34.56.78:80 # # prevent Apache from glomming onto all bound IP addresses. # Change this to Listen on specific IP addresses as shown below to # # directive. # ports, instead of the default. See also the <VirtualHost> # Listen: Allows you to bind Apache to specific IP addresses and/or # ServerRoot "/etc/httpd" # # least PidFile. # same ServerRoot for multiple httpd daemons, you will need to change at # Mutex directive, if file-based mutexes are used. If you wish to share the # ServerRoot at a non-local disk, be sure to specify a local disk on the # Do not add a slash at the end of the directory path. If you point # # configuration, error, and log files are kept. # ServerRoot: The top of the directory tree under which the server's # # interpreted as '/log/access_log'. # server as '/www/log/access_log', where as '/log/access_log' will be # with ServerRoot set to '/www' will be interpreted by the # with "/", the value of ServerRoot is prepended -- so 'log/access_log' # server will use that explicit path. If the filenames do *not* begin # of the server's control files begin with "/" (or "drive:/" for Win32), the # Configuration and logfile names: If the filenames you specify for many # # consult the online docs. You have been warned. # what they do. They're here only as hints or reminders. If you are unsure # Do NOT simply read the instructions in here without understanding # # and httpd.service(8) on using and configuring the httpd service. # See the httpd.conf(5) man page for more information on this configuration, # # for a discussion of each configuration directive. # <URL:http://httpd.apache.org/docs/2.4/mod/directives.html> # In particular, see # See <URL:http://httpd.apache.org/docs/2.4/> for detailed information. # configuration directives that give the server its instructions. # This is the main Apache HTTP server configuration file. It contains the # ad M � � k e H < ; 9 � � � � f 5 �
�
�
�
�
q
4
� � � n l \ J I , * � � � IIncludeOptional confd/*.conf # Load config files in the "/etc/httpd/conf.d" directory, if any. # # Supplemental configuration EnableSendfile on #EnableMMAP off # # Defaults if commented: EnableMMAP On, EnableSendfile Off # broken on your system. # filesystems or if support for these functions is otherwise # be turned off when serving from networked-mounted # files. This usually improves server performance, but must # memory-mapping or the sendfile syscall may be used to deliver # EnableMMAP and EnableSendfile: On systems that support it, # # #ErrorDocument 402 http://www.example.com/subscription_info.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 404 /missing.html #ErrorDocument 500 "The server made a boo boo." # Some examples: # # 1) plain text 2) local redirects 3) external redirects # Customizable error responses come in three flavors: # </IfModule> MIMEMagicFile conf/magic # # directive tells the module where the hint definitions are located. # contents of the file itself to determine its type. The MIMEMagicFile ad � � = � � � � � J
� � � � � � � � ` �
�
�
�
�
�
?
� � � � � � � � | c K > = � � � � 6 0 �
�
�
w
:
� { Q K G � � � � � � � � � v t ^ @ 4 3 1 � � � � � � � � k & � � Y W = < : � � � � � � u o & � � � p o S � � � � W � � Y S + * $ # #CustomLog "logs/access_log" common # # logged therein and *not* in this file. # define per-<VirtualHost> access logfiles, transactions will be # container, they will be logged here. Contrariwise, if you *do* # If you do not define any access logfiles within a <VirtualHost> # The location and format of the access logfile (Common Logfile Format). # </IfModule> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio # You need to enable mod_logio.c to use %I and %O <IfModule logio_module> LogFormat "%h %l %u %t \"%r\" %>s %b" common LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined # # a CustomLog directive (see below). # The following directives define some format nicknames for use with # <IfModule log_config_module> LogLevel warn # # alert, emerg. # Possible values include: debug, info, notice, warn, error, crit, # LogLevel: Control the number of messages logged to the error_log. # ErrorLog "logs/error_log" # # container, that host's errors will be logged there and not here. # logged here. If you *do* define an error logfile for a <VirtualHost> # container, error messages relating to that virtual host will be # If you do not specify an ErrorLog directive within a <VirtualHost> # ErrorLog: The location of the error log file. # </Files> Require all denied <Files ".ht*"> # # viewed by Web clients. # The following lines prevent .htaccess and .htpasswd files from being # </IfModule> DirectoryIndex index.html <IfModule dir_module> # # is requested. # DirectoryIndex: sets the file that Apache wi Require all granted # 允许所有访问 AllowOverride All # 允许 .htaccess 覆盖配置（WordPress 必需） # # Options FileInfo AuthConfig Limit # It can be "All", "None", or any combination of the keywords: # AllowOverride controls what directives may be placed in .htaccess files. # # # for more information. # http://httpd.apache.org/docs/2.4/mod/core.html#options # The Options directive is both complicated and important. Please see # # doesn't give it to you. # Note that "MultiViews" must be named *explicitly* --- "Options All" # # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews # or any combination of: # Possible values for the Options directive are "None", "All", # <Directory "/var/www/html"> # Further relax access to the default document root: </Directory> Require all granted # Allow open access: AllowOverride None <Directory "/var/www"> # # Relax access to content within /var/www. # DocumentRoot "/var/www/html" # # symbolic links and aliases may be used to point to other locations. # documents. By default, all requests are taken from this directory, but # DocumentRoot: The directory out of which you will serve your # # # below. # you might expect, make sure that you have specifically enabled it # particular features to be enabled - so if something's not working as # Note that from this point forward you must specifically allow # </Directory> Require all denied AllowOverride none <Directory /> # # <Directory> blocks below. # explicitly permit access to web content directories in other # Deny access to the entirety of your server's filesystem. You must # #ServerName www.example.com:80 # # If your host doesn't have a registered DNS name, enter its IP address here. ad � = � � � � � � � h X V @ " � � � � � � } M �
~
;
9
� � � � u t W Q � � � R Q 5 �
�
�
�
�
9
� � h ; 5
# #CustomLog "logs/access_log" common # # logged therein and *not* in this file. # define per-<VirtualHost> access logfiles, transactions will be # container, they will be logged here. Contrariwise, if you *do* # If you do not define any access logfiles within a <VirtualHost> # The location and format of the access logfile (Common Logfile Format). # </IfModule> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio # You need to enable mod_logio.c to use %I and %O <IfModule logio_module> LogFormat "%h %l %u %t \"%r\" %>s %b" common LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined # # a CustomLog directive (see below). # The following directives define some format nicknames for use with # <IfModule log_config_module> LogLevel warn # # alert, emerg. # Possible values include: debug, info, notice, warn, error, crit, # LogLevel: Control the number of messages logged to the error_log. # ErrorLog "logs/error_log" # # container, that host's errors will be logged there and not here. # logged here. If you *do* define an error logfile for a <VirtualHost> # container, error messages relating to that virtual host will be # If you do not specify an ErrorLog directive within a <VirtualHost> # ErrorLog: The location of the error log file. # </Files> Require all denied <Files ".ht*"> # # viewed by Web clients. # The following lines prevent .htaccess and .htpasswd files from being # </IfModule> DirectoryIndex index.html <IfModule dir_module> # # is requested. # DirectoryIndex: sets the file that Apache will serve if a directory # </Directory> # # Controls who can get stuff from this server. #