b0VIM 8.0���g��=rootiZdzfnv9mwfppeZ/etc/httpd/conf/httpd.confutf-8
U3210#"! Utp_D

��������w`
m`
!D

^`
��������x`
��������j�
��������!D

adI�
_��q)���S�
}
J
H
��k#��~}{6�
v
)
�	�	�	�	�	�	n	2	%	#	�����}WU�q*�����tDB����wjiKI�}<:������I�����b�
�
�
## it explicitly to prevent problems during startup.# This can often be determined automatically, but we recommend you specify# ServerName gives the name and port that the server uses to identify itself.#ServerAdmin root@localhost## as error documents.  e.g. admin@your-domain.com# e-mailed.  This address appears on some server-generated pages, such# ServerAdmin: Your address, where problems with the server should be### virtual host being defined.# in which case these default settings will be overridden for the# All of these directives may appear inside <VirtualHost> containers,## any <VirtualHost> containers you may define later in the file.# <VirtualHost> definition.  These values also provide defaults for# server, which responds to any requests that aren't handled by a# The directives in this section set up the values used by the 'main'## 'Main' server configurationGroup apacheUser apache## running httpd, as with most system services.# It is usually good practice to create a dedicated user and group for# User/Group: The name (or #number) of the user/group to run httpd as.## httpd as root initially and it will switch.  # If you wish httpd to run as a different user or group, you must run#Include conf.modules.d/*.conf## LoadModule foo_module modules/mod_foo.so# Example:## to be loaded here.# Statically compiled modules (those listed by `httpd -l') do not need# directives contained in it are actually available _before_ they are used.# have to place corresponding `LoadModule' lines at this location so the# To be able to use the functionality of a module which was built as a DSO you## Dynamic Shared Object (DSO) Support#Listen 80#Listen 12.34.56.78:80## prevent Apache from glomming onto all bound IP addresses.# Change this to Listen on specific IP addresses as shown below to ## directive.# ports, instead of the default. See also the <VirtualHost># Listen: Allows you to bind Apache to specific IP addresses and/or#ServerRoot "/etc/httpd"## least PidFile.# same ServerRoot for multiple httpd daemons, you will need to change at# Mutex directive, if file-based mutexes are used.  If you wish to share the# ServerRoot at a non-local disk, be sure to specify a local disk on the# Do not add a slash at the end of the directory path.  If you point## configuration, error, and log files are kept.# ServerRoot: The top of the directory tree under which the server's## interpreted as '/log/access_log'.# server as '/www/log/access_log', where as '/log/access_log' will be# with ServerRoot set to '/www' will be interpreted by the# with "/", the value of ServerRoot is prepended -- so 'log/access_log'# server will use that explicit path.  If the filenames do *not* begin# of the server's control files begin with "/" (or "drive:/" for Win32), the# Configuration and logfile names: If the filenames you specify for many## consult the online docs. You have been warned.  # what they do.  They're here only as hints or reminders.  If you are unsure# Do NOT simply read the instructions in here without understanding## and httpd.service(8) on using and configuring the httpd service.# See the httpd.conf(5) man page for more information on this configuration,## for a discussion of each configuration directive.# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html># In particular, see # See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.# configuration directives that give the server its instructions.# This is the main Apache HTTP server configuration file.  It contains the#adI�
_��q)���S�
}
J
H
��k#��~}{6�
v
)
�	�	�	�	�	�	n	2	%	#	�����}WU�q*�����tDB����wjiKI�}<:������I�����b�
�
�
### it explicitly to prevent problems during startup.# This can often be determined automatically, but we recommend you specify# ServerName gives the name and port that the server uses to identify itself.#ServerAdmin root@localhost## as error documents.  e.g. admin@your-domain.com# e-mailed.  This address appears on some server-generated pages, such# ServerAdmin: Your address, where problems with the server should be### virtual host being defined.# in which case these default settings will be overridden for the# All of these directives may appear inside <VirtualHost> containers,## any <VirtualHost> containers you may define later in the file.# <VirtualHost> definition.  These values also provide defaults for# server, which responds to any requests that aren't handled by a# The directives in this section set up the values used by the 'main'## 'Main' server configurationGroup apacheUser apache## running httpd, as with most system services.# It is usually good practice to create a dedicated user and group for# User/Group: The name (or #number) of the user/group to run httpd as.## httpd as root initially and it will switch.  # If you wish httpd to run as a different user or group, you must run#Include conf.modules.d/*.conf## LoadModule foo_module modules/mod_foo.so# Example:## to be loaded here.# Statically compiled modules (those listed by `httpd -l') do not need# directives contained in it are actually available _before_ they are used.# have to place corresponding `LoadModule' lines at this location so the# To be able to use the functionality of a module which was built as a DSO you## Dynamic Shared Object (DSO) Support#Listen 80#Listen 12.34.56.78:80## prevent Apache from glomming onto all bound IP addresses.# Change this to Listen on specific IP addresses as shown below to ## directive.# ports, instead of the default. See also the <VirtualHost># Listen: Allows you to bind Apache to specific IP addresses and/or#ServerRoot "/etc/httpd"## least PidFile.# same ServerRoot for multiple httpd daemons, you will need to change at# Mutex directive, if file-based mutexes are used.  If you wish to share the# ServerRoot at a non-local disk, be sure to specify a local disk on the# Do not add a slash at the end of the directory path.  If you point## configuration, error, and log files are kept.# ServerRoot: The top of the directory tree under which the server's## interpreted as '/log/access_log'.# server as '/www/log/access_log', where as '/log/access_log' will be# with ServerRoot set to '/www' will be interpreted by the# with "/", the value of ServerRoot is prepended -- so 'log/access_log'# server will use that explicit path.  If the filenames do *not* begin# of the server's control files begin with "/" (or "drive:/" for Win32), the# Configuration and logfile names: If the filenames you specify for many## consult the online docs. You have been warned.  # what they do.  They're here only as hints or reminders.  If you are unsure# Do NOT simply read the instructions in here without understanding## and httpd.service(8) on using and configuring the httpd service.# See the httpd.conf(5) man page for more information on this configuration,## for a discussion of each configuration directive.# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html># In particular, see # See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.# configuration directives that give the server its instructions.# This is the main Apache HTTP server configuration file.  It contains the#ad&�
m����B<���W�
�
�
�
C
4
	

�@%$��E�
�
�
�
a
`
T
S
Q

�	�	�	�	�	u	h	g	P	J		�����f)#���tnO.(���oGF@��rl-�����utn"���tPDCA�}A42�
�
nt problems during startup.# This can oft    #<IfModule mime_magic_module>AddDefaultCharset UTF-8## directive:# in HTML content to override this choice, comment out this# default browser choice (ISO-8859-1), or to allow the META tags# interpretation of all content as UTF-8 by default.  To use the # Specify a default charset for all content served; this enables#</IfModule>    AddOutputFilter INCLUDES .shtml    AddType text/html .shtml    #    # (You will also need to add "Includes" to the "Options" directive.)    # To parse .shtml files for server-side includes (SSI):    #    # Filters allow you to process content before it is sent to the client.    #    #AddHandler type-map var    # For type maps (negotiated resources):    #AddHandler cgi-script .cgi    #    # (You will also need to add "ExecCGI" to the "Options" directive.)    # To use CGI scripts outside of ScriptAliased directories:    #    # or added with the Action directive (see below)    # actions unrelated to filetype. These can be either built into the server    # AddHandler allows you to map certain file extensions to "handlers":    #    AddType application/x-gzip .gz .tgz    AddType application/x-compress .Z    #    # probably should define those extensions to indicate media types:    # If the AddEncoding directives above are commented-out, then you    #    #AddEncoding x-gzip .gz .tgz    #AddEncoding x-compress .Z    #    # information on the fly. Note: Not all browsers support this.    # AddEncoding allows you to have certain browsers uncompress    #    #AddType application/x-gzip .tgz    #    # file specified in TypesConfig for specific file types.    # AddType allows you to add to or override the MIME configuration    #    TypesConfig /etc/mime.types    #    # filename extension to MIME-type.    # TypesConfig points to the file containing the list of mappings from    #<IfModule mime_module></Directory>    Require all granted    Options None    AllowOverride None<Directory "/var/www/cgi-bin">## CGI directory exists, if you have that configured.# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased#</IfModule>    ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"    #    # directives as to Alias.    # client.  The same rules about trailing "/" apply to ScriptAlias    # run by the server when requested rather than as documents sent to the    # documents in the target directory are treated as applications and    # ScriptAliases are essentially the same as Aliases, except that    # ScriptAlias: This controls which directories contain server scripts.     #    # the filesystem path.    # need to provide a <Directory> section to allow access to    # require it to be present in the URL.  You will also likely    # If you include a trailing / on /webpath then the server will    #    # Alias /webpath /full/filesystem/path    # Example:    # access content that does not live under the DocumentRoot.    # Alias: Maps web paths into filesystem paths and is used to    #    # Redirect permanent /foo http://www.example.com/bar    # Example:    # will make a new request for the document at its new location.    # exist in your server's namespace, but do not anymore. The client     # Redirect: Allows you to tell clients about documents that used to     #<IfModule alias_module></IfModule>    CustomLog "logs/access_log" combined    #    # (Combined Logfile Format) you can use the following directive.    # If you prefer a logfile with access, agent, and referer information    #    #CustomLog "logs/access_log" commonad�
�!�d�����zxg7�
�
�
�
�
a
!
��rY����� Load config files in the "/etc/httpd/conf.d" directory, if any.## Supplemental configurationEnableSendfile on#EnableMMAP off## Defaults if commented: EnableMMAP On, EnableSendfile Off# broken on your system.# filesystems or if support for these functions is otherwise# be turned off when serving from networked-mounted # files.  This usually improves server performance, but must# memory-mapping or the sendfile syscall may be used to deliver# EnableMMAP and EnableSendfile: On systems that support it, ###ErrorDocument 402 http://www.example.com/subscription_info.html#ErrorDocument 404 "/cgi-bin/missing_handler.pl"#ErrorDocument 404 /missing.html#ErrorDocument 500 "The server made a boo boo."# Some examples:## 1) plain text 2) local redirects 3) external redirects# Customizable error responses come in three flavors:#</IfModule>    MIMEMagicFile conf/magic    #    # directive tells the module where the hint definitions are located.    # contents of the file itself to determine its type.  The MIMEMagicFile    # The mod_mime_magic module allows the server to use various hints from the